Splet04. nov. 2006 · The epoxy paint is thick and strong enough to cover most of the scratches and little damages that the hull must have. Might need a lot of sanding for a good finish since the epoxy is really thick. One problem I had with the keel of our J/24 (painted with epoxy) if the surface of the coat became really dry and started to get scars all over. Splet15. apr. 2015 · Unfortunately, the best time for painting your boat is also the best time for using it. Much of the prep work is not temperature dependent, so you can clean, sand and …
Shane Keller - Fiberglass/gelcoat/ paint repair
SpletSo here’s the story: I redid the entire bottom of the hull using 1)total boat total protect primer 2) gelcoat without wax 4 coats, and then top finishing layer 1 coat with wax. Came out perfectly. I had a repair on the top side shown in the picture and doing the same process it also came out perfectly with the exception of I didn’t tint it ... Splet16. nov. 2016 · Some research I have done suggest the thick gelcoat is part of the reason for spider cracks (when the fiberglass flexes the gelcoat cracks). My plan at the moment is, a coat of laminating gelcoat on bare fiberglass, a second coat of laminating on the entire hull, a third coat of waxed/final gelcoat on the entire hull, sand with 400-600 grit and ... navicat for mysql 5.7
What is the best paint for my boat? - Bottom Paint Store
SpletPosts: 10,108. Images: 12. Re: 2 pack paint or gelcoat for maintenance concideration on 50ft cat. There is more to the weight than the print through mat (which is also required … Splet11. apr. 2024 · If you are using bottom paint, there is no need to do a gelcoat repair. Simply paint with epoxy. this was what was suggested to me originally. I then got advice from multiple other people saying to gel coat the exposed glass. This being my first time doing anything like this im not sure which direction to go lol. Splet15. feb. 2024 · The boat owner may prefer using paint instead of Gelcoat or want to apply more Gelcoat to the older wearing-off Gelcoat. These options are easily achievable with the following tips. If the Gelcoat is in good condition with no corrosion or major cracking, the job is rather unambiguous– you tidy the surface, use an epoxy primer, sand the primer ... navicat for mysql 64位破解